Free download Cisco certification 640-802 exam practice questions and answers

Our IT-Tests.com have a lot of IT professionals and the exam practice questions and answers we provide have been certified by many IT elites. Besides, the exam practice questions and answers have wide coverage of the content of the examination and the correct rate is up to 100%. Although there are many similar websites, perhaps they can provide you study guide and online services, our IT-Tests.com is leading these many websites. The reason of making the IT-Tests.com stand out in so many peers is that we have a lot of timely updated practice questions and answers which accurately and correctly hit the exam. So we can well improve the exam pass rate and make the people ready to participate in Cisco certification 640-802 exam safely use practice questions and answers provided by IT-Tests.com to pass the exam. IT-Tests.com 100% guarantee you to pass Cisco certification 640-802 exam.

Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So IT-Tests.com is not only the best choice for you to participate in the Cisco certification 640-802 exam, but also the best protection for your success.

Exam Code: 640-802
Exam Name: Cisco (Cisco Certified Network Associate(CCNA))

In this age of advanced network, there are many ways to prepare Cisco 640-802 certification exam. IT-Tests.com provides the most reliable training questions and answers to help you pass Cisco 640-802 certification exam. . IT-Tests.com have a variety of Cisco certification exam questions, we will meet you all about IT certification.

If you choose to buy the IT-Tests's raining plan, we can make ensure you to 100% pass your first time to attend Cisco certification 640-802 exam. If you fail the exam, we will give a full refund to you.

640-802 (Cisco Certified Network Associate(CCNA)) Free Demo Download: http://www.it-tests.com/640-802.html

NO.1 When you are logged into a switch, which prompt indicates that you are in privileged mode?
A. %
B. @
C. >
D. $
E. #
Answer: E

Cisco   640-802 exam prep   640-802 exam   640-802 exam   640-802

NO.2 The network default gateway applying to a host by DHCP is 192.168.5.33/28. Which option is the valid
IP address of this host?
A. 192.168.5.55
B. 192.168.5.47
C. 192.168.5.40
D. 192.168.5.32
E. 192.168.5.14
Answer: C

Cisco certification   640-802 exam dumps   640-802 exam

NO.3 What must be set correctly when configuring a serial interface so that higher-level protocols calculate
the
best route?
A. bandwidth
B. delay
C. load
D. reliability
Answer: A

Cisco answers real questions   640-802   640-802   640-802 certification training   640-802 exam simulations

NO.4 The network administrator has asked you to check the status of the workstation's IP stack by pinging the
loopback address. Which address would you ping to perform this task?
A. 10.1.1.1
B. 127.0.0.1
C. 192.168.0.1
D. 239.1.1.1
Answer: B

Cisco   640-802   640-802   640-802   640-802

NO.5 Which command is used to load a configuration from a TFTP server and merge the configuration into
RAM?
A. copy running-config: TFTP:
B. copy TFTP: running-config
C. copy TFTP: startup-config
D. copy startup-config: TFTP:
Answer: B

Cisco test questions   640-802 questions   640-802 exam simulations

NO.6 Your ISP has given you the address 223.5.14.6/29 to assign to your router's interface. They have also
given you the default gateway address of 223.5.14.7. After you have configured the address, the router is
unable to ping any remote devices. What is preventing the router from pinging remote devices?
A. The default gateway is not an address on this subnet.
B. The default gateway is the broadcast address for this subnet.
C. The IP address is the broadcast address for this subnet.
D. The IP address is an invalid class D multicast address.
Answer: B

Cisco   640-802 exam prep   640-802 exam prep   640-802 test   640-802 certification

NO.7 Data transfer is slow between the source and destination. The quality of service requested by the
transport layer in the OSI reference model is not being maintained. To fix this issue, at which layer should
the troubleshooting process begin?
A. presentation
B. session
C. transport
D. network
E. physical
Answer: D

Cisco   640-802 pdf   640-802   640-802

NO.8 Which command is used to see the path taken by packets across an IP network?
A. show ip route
B. show route
C. traceroute
D. trace ip route
Answer: C

Cisco exam   640-802   640-802   640-802 pdf   640-802

NO.9 Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assigned an
IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts
to ping between the hosts are unsuccessful. What two things can be done to allow communications
between the hosts? (Choose two.)
A. Replace the straight-through cable with a crossover cable.
B. Change the subnet mask of the hosts to /25.
C. Change the subnet mask of the hosts to /26.
D. Change the address of Workstation A to 192.0.2.15.
E. Change the address of Workstation B to 192.0.2.111.
Answer: AB

Cisco practice test   640-802   640-802

NO.10 A system administrator types the command to change the hostname of a router. Where on the Cisco
IFS is that change stored?
A. NVRAM
B. RAM
C. FLASH
D. ROM
E. PCMCIA
Answer: B

Cisco   640-802   640-802 study guide   640-802 answers real questions   640-802

NO.11 Which two addresses can be assigned to a host with a subnet mask of 255.255.254.0? (Choose two.)
A. 113.10.4.0
B. 186.54.3.0
C. 175.33.3.255
D. 26.35.2.255
E. 17.35.36.0
Answer: BD

Cisco braindump   640-802 exam   640-802 certification   640-802 study guide

NO.12 A network administrator must configure 200 switch ports to accept traffic from only the currently
attached host devices. What would be the most efficient way to configure MAC-level security on all these
ports?
A. Visually verify the MAC addresses and then telnet to the switches to enter the switchport-port security
mac-address command.
B. Have end users e-mail their MAC addresses. Telnet to the switch to enter the switchport-port security
mac-address command.
C. Use the switchport port-security MAC address sticky command on all the switch ports that have end
devices connected to them.
D. Use show mac-address-table to determine the addresses that are associated with each port and then
enter the commands on each switch for MAC address port-security.
Answer: C

Cisco   640-802 questions   640-802   640-802

NO.13 Which protocols are found in the network layer of the OSI reference model and are responsible for
path determination and traffic switching?
A. LAN
B. routing
C. WAN
D. network
Answer: B

Cisco   640-802 study guide   640-802 braindump   640-802 practice test

NO.14 Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13. An 802.
1Q trunk is configured between the two switches. On CAT1, VLAN 10 is chosen as native, but on CAT2
the native VLAN is not specified.What will happen in this scenario?
A. 802.1Q giants frames could saturate the link.
B. VLAN 10 on CAT1 and VLAN 1 on CAT2 will send untagged frames.
C. A native VLAN mismatch error message will appear.
D. VLAN 10 on CAT1 and VLAN 1 on CAT2 will send tagged frames.
Answer: C

Cisco   640-802   640-802

NO.15 When configuring a serial interface on a router, what is the default encapsulation?
A. atm-dxi
B. frame-relay
C. hdlc
D. lapb
E. ppp
Answer: C

Cisco   640-802   640-802   640-802   640-802 practice test

NO.16 Which command is used to configure a default route?
A. ip route 172.16.1.0 255.255.255.0 0.0.0.0
B. ip route 172.16.1.0 255.255.255.0 172.16.2.1
C. ip route 0.0.0.0 255.255.255.0 172.16.2.1
D. ip route 0.0.0.0 0.0.0.0 172.16.2.1
Answer: D

Cisco   640-802 practice test   640-802   640-802   640-802   640-802 exam prep

NO.17 When troubleshooting a Frame Relay connection, what is the first step when performing a loopback
test?
A. Set the encapsulation of the interface to HDLC.
B. Place the CSU/DSU in local-loop mode.
C. Enable local-loop mode on the DCE Frame Relay router.
D. Verify that the encapsulation is set to Frame Relay.
Answer: A

Cisco   640-802   640-802 braindump

NO.18 Refer to the exhibit.
Which WAN protocol is being used?
A. ATM
B. HDLC
C. Frame Relay
D. PPP
Answer: C

Cisco   640-802 certification   640-802

NO.19 Which command is used to copy the configuration from RAM into NVRAM?
A. copy running-config startup-config
B. copy startup-config: running-config:
C. copy running config startup config
D. copy startup config running config
E. write terminal
Answer: A

Cisco pdf   640-802   640-802

NO.20 Which command would correctly configure a serial port on a router with the last usable host address in
the 192.216.32.32/29 subnet?
A. Router(config-if)# ip address 192.216.32.38 255.255.255.240
B. Router(config-if)# ip address 192.216.32.39 255.255.255.224
C. Router(config-if)# ip address 192.216.32.63 255.255.255.248
D. Router(config-if)# ip address 192.216.32.39 255.255.255.248
E. Router(config-if)# ip address 192.216.32.63 255.255.255.248
F. Router(config-if)# ip address 192.216.32.38 255.255.255.248
Answer: F

Cisco answers real questions   640-802 study guide   640-802 exam prep   640-802 demo

NO.21 Which command is used to debug a ping command?
A. debug icmp
B. debug ip icmp
C. debug tcp
D. debug packet
Answer: B

Cisco   640-802   640-802   640-802 exam   640-802

NO.22 Which command displays CPU utilization?
A. show protocols
B. show process
C. show system
D. show version
Answer: B

Cisco exam prep   640-802   640-802 dumps   640-802 study guide   640-802   640-802

NO.23 Which command reveals the last method used to powercycle a router?
A. show reload
B. show boot
C. show running-config
D. show version
Answer: D

Cisco   640-802   640-802   640-802 pdf

NO.24 Which three options are valid WAN connectivity methods? (Choose three.)
A. PPP
B. WAP
C. HDLC
D. MPLS
E. L2TPv3
F. ATM
Answer: ACF

Cisco   640-802   640-802   640-802   640-802 test questions

NO.25 A company implements video conferencing over IP on their Ethernet LAN. The users notice that the
network slows down, and the video either stutters or fails completely. What is the most likely reason for
this?
A. minimum cell rate (MCR)
B. quality of service (QoS)
C. modulation
D. packet switching exchange (PSE)
E. reliable transport protocol (RTP)
Answer: B

Cisco   640-802   640-802 test   640-802   640-802 answers real questions

NO.26 Which layer in the OSI reference model is responsible for determining the availability of the receiving
program and checking to see if enough resources exist for that communication?
A. transport
B. network
C. presentation
D. session
E. application
Answer: E

Cisco test questions   640-802 test questions   640-802   640-802   640-802   640-802

NO.27 Which command would you configure globally on a Cisco router that would allow you to view directly
connected Cisco devices?
A. enable cdp
B. cdp enable
C. cdp run
D. run cdp
Answer: C

Cisco   640-802   640-802   640-802 certification

NO.28 Which command shows system hardware and software version information?
A. show configuration
B. show environment
C. show inventory
D. show platform
E. show version
Answer: E

Cisco   640-802 certification   640-802   640-802   640-802 exam dumps

NO.29 What is the difference between a CSU/DSU and a modem?
A. A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals
from a router to a leased line.
B. A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals
from a router to a leased line.
C. A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals
from a router to a phone line.
D. A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals
from a router to a phone line.
Answer: D

Cisco   640-802   640-802

NO.30 If IP routing is enabled, which two commands set the gateway of last resort to the default gateway?
(Choose two.)
A. ip default-gateway 0.0.0.0
B. ip route 172.16.2.1 0.0.0.0 0.0.0.0
C. ip default-network 0.0.0.0
D. ip default-route 0.0.0.0 0.0.0.0 172.16.2.1
E. ip route 0.0.0.0 0.0.0.0 172.16.2.1
Answer: CE

Cisco   640-802 original questions   640-802 test   640-802

In order to pass Cisco certification 640-802 exam, selecting the appropriate training tools is very necessary. And professional study materials about Cisco certification 640-802 exam is a very important part. Our Pass4Tes can have a good and quick provide of professional study materials about Cisco certification 640-802 exam. Our IT-Tests.com IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same. IT-Tests.com is a convenient website specifically for people who want to take the certification exams, which can effectively help the candidates to pass the exam.