Exam 070-562 braindumps

Passing 070-562 exam is not very simple. 070-562 exam requires a high degree of professional knowledge of IT, and if you lack this knowledge, IT-Tests.com can provide you with a source of IT knowledge. IT-Tests's expert team will use their wealth of expertise and experience to help you increase your knowledge, and can provide you practice questions and answers 070-562 certification exam. IT-Tests.com will not only do our best to help you pass the 070-562 certification exam for only one time, but also help you consolidate your IT expertise. If you select IT-Tests, we can not only guarantee you 100% pass 070-562 certification exam, but also provide you with a free year of exam practice questions and answers update service. And if you fail to pass the examination carelessly, we can guarantee that we will immediately 100% refund your cost to you.

Are you worried about how to passs the terrible Microsoft 070-562 exam? Do not worry, With IT-Tests.com's Microsoft 070-562 exam training materials in hand, any IT certification exam will become very easy. IT-Tests.com's Microsoft 070-562 exam training materials is a pioneer in the Microsoft 070-562 exam certification preparation.

Exam Code: 070-562
Exam Name: Microsoft TS: Microsoft .NET Framework 3.5, ASP.NET Application Development 070-562
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Updated: 2013-08-27

If you are still struggling to prepare for passing 070-562 certification exam, at this moment IT-Tests.com can help you solve problem. IT-Tests.com can provide you training materials with good quality to help you pass the exam, then you will become a good Microsoft 070-562 certification member. If you have decided to upgrade yourself by passing Microsoft certification 070-562 exam, then choosing IT-Tests.com is not wrong. Our IT-Tests.com promise you that you can pass your first time to participate in the Microsoft certification 070-562 exam and get Microsoft 070-562 certification to enhance and change yourself.

Microsoft certification 070-562 exams has a pivotal position in the IT industry, and I believe that a lot of IT professionals agree with it. Passing Microsoft certification 070-562 exam has much difficulty and needs to have perfect IT knowledge and experience. Because after all, Microsoft certification 070-562 exam is an authoritative test to inspect examinees' IT professional knowledge. If you have got a Microsoft 070-562 certification, your IT professional ability will be approved by a lot of IT company. IT-Tests.com also has a pivotal position in IT training industry. Many IT personnels who have passed Microsoft certification 070-562 exam used IT-Tests's help to pass the exam. This explains why IT-Tests's pertinence training program is very effective. If you use the training material we provide, you can 100% pass the exam.

More and more people choose Microsoft 070-562 exam. Because of its popularity, you can use the IT-Tests.com Microsoft 070-562 exam questions and answers to pass the exam. This will bring you great convenience and comfort. This is a practice test website. It is available on the Internet with the exam questions and answers, as we all know, IT-Tests.com is the professional website which provide Microsoft 070-562 exam questions and answers.

070-562 (TS: Microsoft .NET Framework 3.5, ASP.NET Application Development) Free Demo Download: http://www.it-tests.com/070-562.html

NO.1 You create a Microsoft ASP.NET application by using the Microsoft .NET
Framework version 3.5.
You add a TextBox control named TextBox1.
You write the following code segment for validation.
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
DateTime dt = String.IsNullOrEmpty(args.Value) ? DateTime.Now :
Convert.ToDateTime(args.Value);
args.IsValid = (DateTime.Now - dt).Days < 10;
}
You need to validate the value of TextBox1.
Which code fragment should you add to the Web page?
A. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
EnableClientScript="false" InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
B. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" ValueToCompare="<%= DateTime.Now; %>">
</asp:CompareValidator>
C. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
D. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" Operator="DataTypeCheck" >
</asp:CompareValidator>
Answer: B

Microsoft dumps   070-562   070-562 test questions   070-562 exam simulations   070-562 test answers

NO.2 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application has a Web form file named MovieReviews.aspx.
The MovieReviews.aspx file connects to a LinqDataSource DataSource named LinqDataSource1 that
has a primary key named MovieID.
The application has a DetailsView control named DetailsView1.
The MovieReviews.aspx file contains the following code fragment. (Line numbers are included for
reference only.)
01 <asp:DetailsView ID="DetailsView1" runat="server" DataSourceID="LinqDataSource1"
02
03 />
04 <Fields>
05 <asp:BoundField DataField="MovieID" HeaderText="MovieID" InsertVisible="False"
ReadOnly="True" SortExpression="MovieID" />
06 <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
07 <asp:BoundField DataField="Theater" HeaderText="Theater" SortExpression="Theater" />
08 <asp:CommandField ShowDeleteButton="false" ShowEditButton="True"
ShowInsertButton="True" />
09 </Fields>
10 </asp:DetailsView>
You need to ensure that the users can insert and update content in the DetailsView1 control.
You also need to prevent duplication of the link button controls for the Edit and New operations.
Which code segment should you insert at line 02?
A. AllowPaging="false"
AutoGenerateRows="false"
B. AllowPaging="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
C. AllowPaging="true"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
D. AllowPaging="false"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
Answer: B

Microsoft   070-562   070-562 answers real questions   070-562   070-562 test answers   070-562

NO.3 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create two user controls named UserCtrlA.ascx and UserCtrlB.ascx. The user controls postback to
the server.
You create a new Web page that has the following ASPX code.
<asp:CheckBox ID="Chk" runat="server" oncheckedchanged="Chk_CheckedChanged"
AutoPostBack="true" />
<asp:PlaceHolder ID="PlHolder" runat="server"></asp:PlaceHolder>
To dynamically create the user controls, you write the following code segment for the Web page.
public void LoadControls() {
if (ViewState["CtrlA"] != null) {
Control c;
if ((bool)ViewState["CtrlA"] == true) {
c = LoadControl("UserCtrlA.ascx"); }
else {
c = LoadControl("UserCtrlB.ascx");
}
ID = "Ctrl";
PlHolder.Controls.Add(c);
}
}
protected void Chk_CheckedChanged(object sender, EventArgs e) {
ViewState["CtrlA"] = Chk.Checked;
PlHolder.Controls.Clear();
LoadControls();
}
You need to ensure that the user control that is displayed meets the following requirements:
It is recreated during postback
It retains its state.
Which method should you add to the Web page?
A. protected override object SaveViewState()
{
LoadControls();
return base.SaveViewState();
}
B. protected override void Render(HtmlTextWriter writer) {
LoadControls();
base.Render(writer);
}
C. protected override void OnLoadComplete(EventArgs e) {
base.OnLoadComplete(e);
LoadControls();
}
D. protected override void LoadViewState(object savedState) {
base.LoadViewState(savedState);
LoadControls();
}
Answer: D

Microsoft original questions   070-562   070-562   070-562 certification   070-562 questions   070-562 test answers

NO.4 You modify an existing Microsoft ASP.NET application by using the Microsoft .NET Framework version
3.5.
You add a theme to the ASP.NET application.
You need to apply the theme to override any settings of individual controls.
What should you do?
A. In the Web.config file of the application, set the Theme attribute of the pages element to the name of
the theme.
B. In the Web.config file of the application, set the StyleSheetTheme attribute of the pages element to the
name of the theme.
C. Add a master page to the application. In the @Master directive, set the Theme attribute to the name of
the theme.
D. Add a master page to the application. In the @Master directive, set the StyleSheetTheme attribute to
the name of the theme.
Answer: A

Microsoft   070-562 test answers   070-562

NO.5 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application must redirect the original URL to a different ASPX page.
You need to ensure that the users cannot view the original URL after the page is executed.
You also need to ensure that each page execution requires only one request from the client browser.
What should you do?
A. Use the Server.Transfer method to transfer execution to the correct ASPX page.
B. Use the Response.Redirect method to transfer execution to the correct ASPX page.
C. Use the HttpContext.Current.RewritePath method to transfer execution to the correct ASPX page.
D. Add the Location: new URL value to the Response.Headers collection. Call the Response.End()
statement. Send the header to the client computer to transfer execution to the correct ASPX page.
Answer: C

Microsoft   070-562 exam dumps   070-562   070-562 demo

NO.6 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment. (Line numbers are included for reference only.)
01 <asp:RequiredFieldValidator
02 ID="rfValidator1" runat="server"
03 Display="Dynamic" ControlToValidate="TextBox1"
04
05 >
06
07 </asp:RequiredFieldValidator>
08
09 <asp:ValidationSummary DisplayMode="List"
10 ID="ValidationSummary1" runat="server" />
You need to ensure that the error message displayed in the validation control is also displayed in the
validation summary list.
What should you do.?
A. Add the following code segment to line 06.
Required text in TextBox1
B. Add the following code segment to line 04.
Text="Required text in TextBox1"
C. Add the following code segment to line 04.
ErrorMessage="Required text in TextBox1"
D. Add the following code segment to line 04.
Text="Required text in TextBox1" ErrorMessage="ValidationSummary1"
Answer: C

Microsoft   070-562 exam dumps   070-562   070-562 answers real questions   070-562

NO.7 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a custom Web user control named SharedControl. The control will be compiled as a library.
You write the following code segment for the SharedControl control. (Line numbers are included for
reference only.)
01 protected override void OnInit(EventArgs e)
02 {
03 base.OnInit(e);
04
05 }
All the master pages in the ASP.NET application contain the following directive.
<%@ Master Language="C#" EnableViewState="false" %>
You need to ensure that the state of the SharedControl control can persist on the pages that reference a
master page.
Which code segment should you insert at line 04?
A. Page.RegisterRequiresPostBack(this);
B. Page.RegisterRequiresControlState(this);
C. Page.UnregisterRequiresControlState(this);
D. Page.RegisterStartupScript("SharedControl","server");
Answer: B

Microsoft   070-562 dumps   070-562 original questions   070-562 practice test   070-562 exam simulations

NO.8 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named enterName.aspx. The Web page contains a TextBox control named
txtName. The Web page cross posts to a page named displayName.aspx that contains a Label control
named lblName.
You need to ensure that the lblName Label control displays the text that was entered in the txtName
TextBox control.
Which code segment should you use?
A. lblName.Text = Request.QueryString["txtName"];
B. TextBox txtName = FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
C. TextBox txtName = Parent.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
D. TextBox txtName = PreviousPage.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
Answer: D

Microsoft practice test   070-562 exam dumps   070-562   070-562 exam simulations   070-562 demo

NO.9 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add the following code fragment to the Web.config file of the application (Line numbers are
includedfor reference only).
01 <healthMonitoring>
02 <providers>
03 <add name="EventLogProvider"
type="System.Web.Management.EventLogWebEventProvider />
04 <add name="WmiWebEventProvider"
type="System.Web.Management.WmiWebEventProvider />
05 </providers>
06 <eventMappings>
07
08 </eventMappings>
09 <rules>
10 <add name="Security Rule" eventName="Security Event" provider="WmiWebEventProvider"
/>
11 <add name="AppError Rule" eventName="AppError Event" provider="EventLogProvider" />
12 </rules>
13 </healthMonitoring>
You need to configure Web Events to meet the following requirements:
Security-related Web Events are mapped to Microsoft Windows Management Instrumentation (WMI)
events.
Web Events caused by problems with configuration or application code are logged into the Windows
Application Event Log.
Which code fragment should you insert at line 07?
A. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
B. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
C. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
D. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
Answer: B

Microsoft   070-562 pdf   070-562   070-562
Exam : 70-562
Title :
Version : Demo
TS: Microsoft .NET
Framework 3.5, ASP.NET
Application Development
1.You create a Microsoft ASP.NET application by using the Microsoft .NET
Framework version 3.5.
You add a TextBox control named TextBox1.
You write the following code segment for validation.
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
DateTime dt = String.IsNullOrEmpty(args.Value) ? DateTime.Now :
Convert.ToDateTime(args.Value);
args.IsValid = (DateTime.Now - dt).Days < 10;
}
You need to validate the value of TextBox1.
Which code fragment should you add to the Web page?
A. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
EnableClientScript="false" InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
B. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" ValueToCompare="<%= DateTime.Now; %>">
</asp:CompareValidator>
C. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
D. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" Operator="DataTypeCheck" >
</asp:CompareValidator>
Answer: B

Microsoft   070-562 test questions   070-562 test
2.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment. (Line numbers are included for reference only.)
01 <asp:RequiredFieldValidator
02 ID="rfValidator1" runat="server"
03 Display="Dynamic" ControlToValidate="TextBox1"
04
05 >
06
07 </asp:RequiredFieldValidator>
08
09 <asp:ValidationSummary DisplayMode="List"
10 ID="ValidationSummary1" runat="server" />
You need to ensure that the error message displayed in the validation control is also displayed in the
validation summary list.
What should you do.?
A. Add the following code segment to line 06.
Required text in TextBox1
B. Add the following code segment to line 04.
Text="Required text in TextBox1"
C. Add the following code segment to line 04.
ErrorMessage="Required text in TextBox1"
D. Add the following code segment to line 04.
Text="Required text in TextBox1" ErrorMessage="ValidationSummary1"
Answer: C

Microsoft test answers   070-562   070-562 questions   070-562   070-562 braindump
3.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment.
<asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server"
onselectedindexchanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem>1</asp:ListItem>
<asp:ListItem>2</asp:ListItem>
<asp:ListItem>3</asp:ListItem>
</asp:DropDownList>
You also add a MultiView control named MultiView1 to the Web page. MultiView1 has three child View
controls.
You need to ensure that you can select the View controls by using the DropDownList1 DropDownList
control.
Which code segment should you use?
A. int idx = DropDownList1.SelectedIndex;
MultiView1.ActiveViewIndex = idx;
B. int idx = DropDownList1.SelectedIndex;
MultiView1.Views[idx].Visible = true;
C. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.ActiveViewIndex = idx;
D. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.Views[idx].Visible = true;
Answer: A

Microsoft certification   070-562   070-562 exam simulations   070-562   070-562   070-562 practice test
4.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create two user controls named UserCtrlA.ascx and UserCtrlB.ascx. The user controls postback to
the server.
You create a new Web page that has the following ASPX code.
<asp:CheckBox ID="Chk" runat="server" oncheckedchanged="Chk_CheckedChanged"
AutoPostBack="true" />
<asp:PlaceHolder ID="PlHolder" runat="server"></asp:PlaceHolder>
To dynamically create the user controls, you write the following code segment for the Web page.
public void LoadControls() {
if (ViewState["CtrlA"] != null) {
Control c;
if ((bool)ViewState["CtrlA"] == true) {
c = LoadControl("UserCtrlA.ascx"); }
else {
c = LoadControl("UserCtrlB.ascx");
}
ID = "Ctrl";
PlHolder.Controls.Add(c);
}
}
protected void Chk_CheckedChanged(object sender, EventArgs e) {
ViewState["CtrlA"] = Chk.Checked;
PlHolder.Controls.Clear();
LoadControls();
}
You need to ensure that the user control that is displayed meets the following requirements:
It is recreated during postback
It retains its state.
Which method should you add to the Web page?
A. protected override object SaveViewState()
{
LoadControls();
return base.SaveViewState();
}
B. protected override void Render(HtmlTextWriter writer) {
LoadControls();
base.Render(writer);
}
C. protected override void OnLoadComplete(EventArgs e) {
base.OnLoadComplete(e);
LoadControls();
}
D. protected override void LoadViewState(object savedState) {
base.LoadViewState(savedState);
LoadControls();
}
Answer: D

Microsoft   070-562   070-562   070-562   070-562 test answers
5.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application has a Web form file named MovieReviews.aspx.
The MovieReviews.aspx file connects to a LinqDataSource DataSource named LinqDataSource1 that
has a primary key named MovieID.
The application has a DetailsView control named DetailsView1.
The MovieReviews.aspx file contains the following code fragment. (Line numbers are included for
reference only.)
01 <asp:DetailsView ID="DetailsView1" runat="server" DataSourceID="LinqDataSource1"
02
03 />
04 <Fields>
05 <asp:BoundField DataField="MovieID" HeaderText="MovieID" InsertVisible="False"
ReadOnly="True" SortExpression="MovieID" />
06 <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
07 <asp:BoundField DataField="Theater" HeaderText="Theater" SortExpression="Theater" />
08 <asp:CommandField ShowDeleteButton="false" ShowEditButton="True"
ShowInsertButton="True" />
09 </Fields>
10 </asp:DetailsView>
You need to ensure that the users can insert and update content in the DetailsView1 control.
You also need to prevent duplication of the link button controls for the Edit and New operations.
Which code segment should you insert at line 02?
A. AllowPaging="false"
AutoGenerateRows="false"
B. AllowPaging="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
C. AllowPaging="true"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
D. AllowPaging="false"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
Answer: B

Microsoft practice test   070-562 test questions   070-562   070-562 dumps
6.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add an XmlDataSource control named XmlDataSource1 to the Web page. XmlDataSource1 is bound
to an XML document with the following structure.
<?xml version="1.0" encoding="utf-8" ?>
<clients>
<client ID="1" Name="John Evans" />
<client ID="2" Name="Mike Miller"/>
...
</clients>
You also write the following code segment in the code-behind file of the Web page.
protected void BulletedList1_Click(object sender, BulletedListEventArgs e) {
//...
}
You need to add a BulletedList control named BulletedList1 to the Web page that is bound to
XmlDataSource1.
Which code fragment should you use?
A. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSource="XmlDataSource1"
DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
B. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="Name" DataMember="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
C. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSourceID="XmlDataSource1" DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
D. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="ID" DataValueField="Name"
onclick="BulletedList1_Click">
</asp:BulletedList>
Answer: C

Microsoft   070-562   070-562 demo   070-562
7.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create the following controls:
A composite custom control named MyControl.
A templated custom control named OrderFormData.
You write the following code segment to override the method named CreateChildControls() in the
MyControl class. (Line numbers are included for reference only.)
01 protected override void CreateChildControls() {
02 Controls.Clear();
03 OrderFormData oFData = new OrderFormData("OrderForm");
04
05 }
You need to add the OrderFormData control to the MyControl control.
Which code segment should you insert at line 04?
A. Controls.Add(oFData);
B. Template.InstantiateIn(this);
Template.InstantiateIn(oFData);
C. Controls.Add(oFData);
this.Controls.Add(oFData);
D. this.TemplateControl = (TemplateControl)Template;
oFData.TemplateControl = (TemplateControl)Template;
Controls.Add(oFData);
Answer: B

Microsoft test answers   070-562   070-562   070-562
8.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. You
create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server" Text='<%# Eval("LineTotal") %>' />
11 </td>
12 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
Answer: A

Microsoft   070-562 questions   070-562   070-562 exam simulations
9.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named Default.aspx in the root of the application. You add an
ImageResources.resx resource file in the App_GlobalResources folder. The ImageResources.resx file
contains a localized resource named LogoImageUrl.
You need to retrieve the value of LogoImageUrl.
Which code segment should you use?
A. string logoImageUrl = (string)GetLocalResourceObject("LogoImageUrl");
B. string logoImageUrl = (string)GetGlobalResourceObject("Default", "LogoImageUrl");
C. string logoImageUrl = (string)GetGlobalResourceObject("ImageResources", "LogoImageUrl");
D. string logoImageUrl = (string)GetLocalResourceObject("ImageResources.LogoImageUrl");
Answer: C

Microsoft   070-562 answers real questions   070-562   070-562
10.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named enterName.aspx. The Web page contains a TextBox control named
txtName. The Web page cross posts to a page named displayName.aspx that contains a Label control
named lblName.
You need to ensure that the lblName Label control displays the text that was entered in the txtName
TextBox control.
Which code segment should you use?
A. lblName.Text = Request.QueryString["txtName"];
B. TextBox txtName = FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
C. TextBox txtName = Parent.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
D. TextBox txtName = PreviousPage.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
Answer: D

Microsoft study guide   070-562   070-562 questions
11.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code segment to create a class named MultimediaDownloader that implements
the IHttpHandler interface.
namespace Contoso.Web.UI {
public class MultimediaDownloader : IHttpHandler {
...
}
}
The MultimediaDownloader class performs the following tasks:
It returns the content of the multimedia files from the Web server
It processes requests for the files that have the .media file extension
The .media file extension is mapped to the aspnet_isapi.dll file in Microsoft IIS 6.0.
You need to configure the MultimediaDownloader class in the Web.config file of the application.
Which code fragment should you use?
A. <httpHandlers>
<add verb="*.media" path="*" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
B. <httpHandlers>
<add verb="HEAD" path="*.media" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
C. <httpHandlers>
<add verb="*" path="*.media" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
D. <httpHandlers>
<add verb="GET,POST" path="*" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
Answer: C

Microsoft certification   070-562   070-562   070-562   070-562   070-562 braindump
12.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application must redirect the original URL to a different ASPX page.
You need to ensure that the users cannot view the original URL after the page is executed.
You also need to ensure that each page execution requires only one request from the client browser.
What should you do?
A. Use the Server.Transfer method to transfer execution to the correct ASPX page.
B. Use the Response.Redirect method to transfer execution to the correct ASPX page.
C. Use the HttpContext.Current.RewritePath method to transfer execution to the correct ASPX page.
D. Add the Location: new URL value to the Response.Headers collection. Call the Response.End()
statement. Send the header to the client computer to transfer execution to the correct ASPX page.
Answer: C

Microsoft   070-562   070-562 exam prep
13.You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The Web site uses C# as the programming language. You plan to add a code file written in Microsoft
VB.NET to the application. This code segment will not be converted to C#.
You add the following code fragment to the Web.config file of the application.
<compilation debug="false">
<codeSubDirectories>
<add directoryName="VBCode"/>
</codeSubDirectories>
</compilation>
You need to ensure that the following requirements are met:
The existing VB.NET file can be used in the Web application
The file can be modified and compiled at run time
What should you do?
A. Create a new class library that uses VB.NET as the programming language.
Add the VB.NET code file to the class library. Add a reference to the class library in the application.
B. Create a new folder named VBCode at the root of the application. Place the VB.NET code file in this
new folder.
C. Create a new Microsoft Windows Communication Foundation (WCF) service project that uses VB.NET
as the programming language. Expose the VB.NET code functionality through the WCF service. Add a
service reference to the WCF service project in the application.
D. Create a new folder named VBCode inside the App_Code folder of the application. Place the VB.NET
code file in this new folder.
Answer: D

Microsoft   070-562 demo   070-562
14.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a custom Web user control named SharedControl. The control will be compiled as a library.
You write the following code segment for the SharedControl control. (Line numbers are included for
reference only.)
01 protected override void OnInit(EventArgs e)
02 {
03 base.OnInit(e);
04
05 }
All the master pages in the ASP.NET application contain the following directive.
<%@ Master Language="C#" EnableViewState="false" %>
You need to ensure that the state of the SharedControl control can persist on the pages that reference a
master page.
Which code segment should you insert at line 04?
A. Page.RegisterRequiresPostBack(this);
B. Page.RegisterRequiresControlState(this);
C. Page.UnregisterRequiresControlState(this);
D. Page.RegisterStartupScript("SharedControl","server");
Answer: B

Microsoft original questions   070-562   070-562   070-562
15.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application runs on Microsoft IIS 6.0.
You create a page named oldPage.aspx.
You need to ensure that the following requirements are met when a user attempts to access the page:
The browser diplays the URL of the oldPage.aspx page.
The browser displays the page named newPage.aspx
Which code segment should you use?
A. Server.Transfer("newPage.aspx");
B. Response.Redirect("newPage.aspx");
C. if (Request.Url.UserEscaped) {
Server.TransferRequest("newPage.aspx");
}
else {
Response.Redirect("newPage.aspx", true);
}
D. if (Request.Url.UserEscaped) {
Response.RedirectLocation = "oldPage.aspx";
Response.Redirect("newPage.aspx", true);
}
else {
Response.Redirect("newPage.aspx");
}
Answer: A

Microsoft questions   070-562   070-562 pdf   070-562 pdf   070-562 exam dumps   070-562 exam simulations
16.You modify an existing Microsoft ASP.NET application by using the Microsoft .NET Framework version
3.5.
You add a theme to the ASP.NET application.
You need to apply the theme to override any settings of individual controls.
What should you do?
A. In the Web.config file of the application, set the Theme attribute of the pages element to the name of
the theme.
B. In the Web.config file of the application, set the StyleSheetTheme attribute of the pages element to the
name of the theme.
C. Add a master page to the application. In the @Master directive, set the Theme attribute to the name of
the theme.
D. Add a master page to the application. In the @Master directive, set the StyleSheetTheme attribute to
the name of the theme.
Answer: A

Microsoft   070-562   070-562 questions   070-562   070-562
17.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application has a mobile Web form that contains the following ObjectList control.
<mobile:ObjectList ID="ObjectListCtrl" OnItemCommand="ObjectListCtrl_ItemCommand"
Runat="server">
<Command Name="CmdDisplayDetails" Text="Details" />
<Command Name="CmdRemove" Text="Remove" />
</mobile:ObjectList>
You create an event handler named ObjectListCtrl_ItemCommand.
You need to ensure that the ObjectListCtrl_ItemCommand handler detects the selection of the
CmdDisplayDetails item.
Which code segment should you write?
A. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandName == "CmdDisplayDetails") {
}
}
B. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandArgument.ToString() == "CmdDisplayDetails") {
}
}
C. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = sender as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
D. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = e.CommandSource as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
Answer: A

Microsoft   070-562 original questions   070-562
18.You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The application contains the following device filter element in the Web.config file.
<filter name="isHtml" compare="PreferredRenderingType"argument="html32" />
The application contains a Web page that has the following image control. (Line numbers are included for
reference only.)
01 <mobile:Image ID="imgCtrl" Runat="server">
03 </mobile:Image>
You need to ensure that the following conditions are met:
The imgCtrl Image control displays he highRes.jpg file if the Web browser supports html.
The imgCtrl Image control displays lowRes.gif if the Web browser does not support html
Which DeviceSpecific element should you insert at line 02?
A. <DeviceSpecific>
<Choice Filter="isHtml" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
B. <DeviceSpecific>
<Choice Filter="isHtml" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="isHtml" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
C. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
D. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="PreferredRenderingType" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
Answer: A

Microsoft   070-562   070-562
19.You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
When you review the application performance counters, you discover that there is an unexpected
increase in the value of the Application Restarts counter.
You need to identify the reasons for this increase.
What are three possible reasons that could cause this increase? (Each correct answer presents a
complete solution. Choose three.)
A. Restart of the Microsoft IIS 6.0 host.
B. Restart of the Microsoft Windows Server 2003 that hosts the Web application.
C. Addition of a new assembly in the Bin directory of the application.
D. Addition of a code segment that requires recompilation to the ASP.NET Web application.
E. Enabling of HTTP compression in the Microsoft IIS 6.0 manager for the application.
F. Modification to the Web.config file in the system.web section for debugging the application.
Answer: CDF

Microsoft exam dumps   070-562   070-562   070-562   070-562 exam dumps
20.You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add the following code fragment to the Web.config file of the application (Line numbers are
includedfor reference only).
01 <healthMonitoring>
02 <providers>
03 <add name="EventLogProvider"
type="System.Web.Management.EventLogWebEventProvider />
04 <add name="WmiWebEventProvider"
type="System.Web.Management.WmiWebEventProvider />
05 </providers>
06 <eventMappings>
07
08 </eventMappings>
09 <rules>
10 <add name="Security Rule" eventName="Security Event" provider="WmiWebEventProvider"
/>
11 <add name="AppError Rule" eventName="AppError Event" provider="EventLogProvider" />
12 </rules>
13 </healthMonitoring>
You need to configure Web Events to meet the following requirements:
Security-related Web Events are mapped to Microsoft Windows Management Instrumentation (WMI)
events.
Web Events caused by problems with configuration or application code are logged into the Windows
Application Event Log.
Which code fragment should you insert at line 07?
A. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
B. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
C. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
D. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
Answer: B

Microsoft questions   070-562 dumps   070-562   070-562 study guide

NO.10 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named Default.aspx in the root of the application. You add an
ImageResources.resx resource file in the App_GlobalResources folder. The ImageResources.resx file
contains a localized resource named LogoImageUrl.
You need to retrieve the value of LogoImageUrl.
Which code segment should you use?
A. string logoImageUrl = (string)GetLocalResourceObject("LogoImageUrl");
B. string logoImageUrl = (string)GetGlobalResourceObject("Default", "LogoImageUrl");
C. string logoImageUrl = (string)GetGlobalResourceObject("ImageResources", "LogoImageUrl");
D. string logoImageUrl = (string)GetLocalResourceObject("ImageResources.LogoImageUrl");
Answer: C

Microsoft   070-562 study guide   070-562 exam prep

NO.11 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The Web site uses C# as the programming language. You plan to add a code file written in Microsoft
VB.NET to the application. This code segment will not be converted to C#.
You add the following code fragment to the Web.config file of the application.
<compilation debug="false">
<codeSubDirectories>
<add directoryName="VBCode"/>
</codeSubDirectories>
</compilation>
You need to ensure that the following requirements are met:
The existing VB.NET file can be used in the Web application
The file can be modified and compiled at run time
What should you do?
A. Create a new class library that uses VB.NET as the programming language.
Add the VB.NET code file to the class library. Add a reference to the class library in the application.
B. Create a new folder named VBCode at the root of the application. Place the VB.NET code file in this
new folder.
C. Create a new Microsoft Windows Communication Foundation (WCF) service project that uses VB.NET
as the programming language. Expose the VB.NET code functionality through the WCF service. Add a
service reference to the WCF service project in the application.
D. Create a new folder named VBCode inside the App_Code folder of the application. Place the VB.NET
code file in this new folder.
Answer: D

Microsoft exam dumps   070-562   070-562   070-562 certification training   070-562

NO.12 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. You
create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server" Text='<%# Eval("LineTotal") %>' />
11 </td>
12 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
Answer: A

Microsoft   070-562   070-562   070-562 pdf

NO.13 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment.
<asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server"
onselectedindexchanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem>1</asp:ListItem>
<asp:ListItem>2</asp:ListItem>
<asp:ListItem>3</asp:ListItem>
</asp:DropDownList>
You also add a MultiView control named MultiView1 to the Web page. MultiView1 has three child View
controls.
You need to ensure that you can select the View controls by using the DropDownList1 DropDownList
control.
Which code segment should you use?
A. int idx = DropDownList1.SelectedIndex;
MultiView1.ActiveViewIndex = idx;
B. int idx = DropDownList1.SelectedIndex;
MultiView1.Views[idx].Visible = true;
C. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.ActiveViewIndex = idx;
D. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.Views[idx].Visible = true;
Answer: A

Microsoft pdf   070-562   070-562   070-562

NO.14 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code segment to create a class named MultimediaDownloader that implements
the IHttpHandler interface.
namespace Contoso.Web.UI {
public class MultimediaDownloader : IHttpHandler {
...
}
}
The MultimediaDownloader class performs the following tasks:
It returns the content of the multimedia files from the Web server
It processes requests for the files that have the .media file extension
The .media file extension is mapped to the aspnet_isapi.dll file in Microsoft IIS 6.0.
You need to configure the MultimediaDownloader class in the Web.config file of the application.
Which code fragment should you use?
A. <httpHandlers>
<add verb="*.media" path="*" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
B. <httpHandlers>
<add verb="HEAD" path="*.media" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
C. <httpHandlers>
<add verb="*" path="*.media" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
D. <httpHandlers>
<add verb="GET,POST" path="*" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
Answer: C

Microsoft   070-562 test answers   070-562 braindump   070-562 original questions

NO.15 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add an XmlDataSource control named XmlDataSource1 to the Web page. XmlDataSource1 is bound
to an XML document with the following structure.
<?xml version="1.0" encoding="utf-8" ?>
<clients>
<client ID="1" Name="John Evans" />
<client ID="2" Name="Mike Miller"/>
...
</clients>
You also write the following code segment in the code-behind file of the Web page.
protected void BulletedList1_Click(object sender, BulletedListEventArgs e) {
//...
}
You need to add a BulletedList control named BulletedList1 to the Web page that is bound to
XmlDataSource1.
Which code fragment should you use?
A. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSource="XmlDataSource1"
DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
B. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="Name" DataMember="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
C. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSourceID="XmlDataSource1" DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
D. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="ID" DataValueField="Name"
onclick="BulletedList1_Click">
</asp:BulletedList>
Answer: C

Microsoft   070-562 exam prep   070-562   070-562   070-562

NO.16 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application has a mobile Web form that contains the following ObjectList control.
<mobile:ObjectList ID="ObjectListCtrl" OnItemCommand="ObjectListCtrl_ItemCommand"
Runat="server">
<Command Name="CmdDisplayDetails" Text="Details" />
<Command Name="CmdRemove" Text="Remove" />
</mobile:ObjectList>
You create an event handler named ObjectListCtrl_ItemCommand.
You need to ensure that the ObjectListCtrl_ItemCommand handler detects the selection of the
CmdDisplayDetails item.
Which code segment should you write?
A. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandName == "CmdDisplayDetails") {
}
}
B. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandArgument.ToString() == "CmdDisplayDetails") {
}
}
C. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = sender as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
D. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = e.CommandSource as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
Answer: A

Microsoft exam   070-562 exam dumps   070-562   070-562 test answers

NO.17 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
When you review the application performance counters, you discover that there is an unexpected
increase in the value of the Application Restarts counter.
You need to identify the reasons for this increase.
What are three possible reasons that could cause this increase? (Each correct answer presents a
complete solution. Choose three.)
A. Restart of the Microsoft IIS 6.0 host.
B. Restart of the Microsoft Windows Server 2003 that hosts the Web application.
C. Addition of a new assembly in the Bin directory of the application.
D. Addition of a code segment that requires recompilation to the ASP.NET Web application.
E. Enabling of HTTP compression in the Microsoft IIS 6.0 manager for the application.
F. Modification to the Web.config file in the system.web section for debugging the application.
Answer: CDF

Microsoft   070-562   070-562   070-562

NO.18 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application runs on Microsoft IIS 6.0.
You create a page named oldPage.aspx.
You need to ensure that the following requirements are met when a user attempts to access the page:
The browser diplays the URL of the oldPage.aspx page.
The browser displays the page named newPage.aspx
Which code segment should you use?
A. Server.Transfer("newPage.aspx");
B. Response.Redirect("newPage.aspx");
C. if (Request.Url.UserEscaped) {
Server.TransferRequest("newPage.aspx");
}
else {
Response.Redirect("newPage.aspx", true);
}
D. if (Request.Url.UserEscaped) {
Response.RedirectLocation = "oldPage.aspx";
Response.Redirect("newPage.aspx", true);
}
else {
Response.Redirect("newPage.aspx");
}
Answer: A

Microsoft questions   070-562 exam simulations   070-562   070-562 certification training   070-562

NO.19 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The application contains the following device filter element in the Web.config file.
<filter name="isHtml" compare="PreferredRenderingType"argument="html32" />
The application contains a Web page that has the following image control. (Line numbers are included for
reference only.)
01 <mobile:Image ID="imgCtrl" Runat="server">
03 </mobile:Image>
You need to ensure that the following conditions are met:
The imgCtrl Image control displays he highRes.jpg file if the Web browser supports html.
The imgCtrl Image control displays lowRes.gif if the Web browser does not support html
Which DeviceSpecific element should you insert at line 02?
A. <DeviceSpecific>
<Choice Filter="isHtml" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
B. <DeviceSpecific>
<Choice Filter="isHtml" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="isHtml" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
C. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
D. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="PreferredRenderingType" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
Answer: A

Microsoft   070-562   070-562 dumps   070-562   070-562 exam prep   070-562

NO.20 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create the following controls:
A composite custom control named MyControl.
A templated custom control named OrderFormData.
You write the following code segment to override the method named CreateChildControls() in the
MyControl class. (Line numbers are included for reference only.)
01 protected override void CreateChildControls() {
02 Controls.Clear();
03 OrderFormData oFData = new OrderFormData("OrderForm");
04
05 }
You need to add the OrderFormData control to the MyControl control.
Which code segment should you insert at line 04?
A. Controls.Add(oFData);
B. Template.InstantiateIn(this);
Template.InstantiateIn(oFData);
C. Controls.Add(oFData);
this.Controls.Add(oFData);
D. this.TemplateControl = (TemplateControl)Template;
oFData.TemplateControl = (TemplateControl)Template;
Controls.Add(oFData);
Answer: B

Microsoft exam simulations   070-562   070-562 demo   070-562

IT-Tests.com is a website that can provide all information about different IT certification exam. IT-Tests.com can provide you with the best and latest exam resources. To choose IT-Tests.com you can feel at ease to prepare your Microsoft 070-562 exam. Our training materials can guarantee you 100% to pass Microsoft certification 070-562 exam, if not, we will give you a full refund and exam practice questions and answers will be updated quickly, but this is almost impossible to happen. IT-Tests.com can help you pass Microsoft certification 070-562 exam and can also help you in the future about your work. Although there are many ways to help you achieve your purpose, selecting IT-Tests.com is your wisest choice. Having IT-Tests.com can make you spend shorter time less money and with greater confidence to pass the exam, and we also provide you with a free one-year after-sales service.