JPexamのMicrosoftの74-338トレーニング資料は完璧な資料で、世界的に最高なものです。これは品質の問題だけではなく、もっと大切なのは、JPexamのMicrosoftの74-338試験資料は全てのIT認証試験に適用するもので、ITの各領域で使用できます。それはJPexamが受験生の注目を浴びる理由です。受験生の皆様は我々を信じて、依頼しています。これもJPexamが実力を体現する点です。我々の試験トレーニング資料はあなたが買いてから友達に勧めなければならない魅力を持っています。本当に皆様に極大なヘルプを差し上げますから。
JPexamのMicrosoftの74-338試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。JPexamの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。
IT領域で仕事しているあなたは、きっとIT認定試験を通して自分の能力を証明したいでしょう。それに、74-338認証資格を持っている同僚や知人などますます多くなっているでしょう。そのような状況で、もし一つの資格を持っていないなら他の人に追及できないですから。では、どんな試験を受けるのかは決めましたか。Microsoftの試験はどうですか。74-338認定試験のようなものはどうでしょうか。これは非常に価値がある試験なのですから、きっとあなたが念願を達成するのを助けられます。
現在、IT業界での激しい競争に直面しているあなたは、無力に感じるでしょう。これは避けられないことですから、あなたがしなければならないことは、自分のキャリアを護衛するのです。色々な選択がありますが、JPexamのMicrosoftの74-338問題集と解答をお勧めします。それはあなたが成功認定を助ける良いヘルパーですから、あなたはまだ何を待っているのですか。速く最新のJPexamのMicrosoftの74-338トレーニング資料を取りに行きましょう。
あなたは自分の職場の生涯にユニークな挑戦に直面していると思いましたら、Microsoftの74-338の認定試験に合格することが必要になります。JPexamはMicrosoftの74-338の認定試験を真実に、全面的に研究したサイトです。JPexam のユニークなMicrosoftの74-338の認定試験の問題と解答を利用したら、試験に合格することがたやすくなります。JPexamは認証試験の専門的なリーダーで、最全面的な認証基準のトレーニング方法を追求して、１００パーセントの成功率を保証します。JPexamのMicrosoftの74-338の試験問題と解答は当面の市場で最も徹底的かつ正確かつ最新な模擬テストです。それを利用したら、初めに試験を受けても、合格する自信を持つようになります。
試験番号：74-338問題集
試験科目：Lync 2013 Depth Support Engineer Exam
最近更新時間：2013-12-27
問題と解答：全114問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/74-338_exam.html
NO.1 You are a member of the CsAdministrator group that supports the Lync datacenter for your
company. The datacenter consists of one pool that is running Microsoft Lync Server 2013. You
deploy SQL Mirroring. The principal server fails and you are unable to perform a manual failover for
more than an hour. Users are placed into resiliency mode. You need to ensure that failover occurs
automatically and without administrator intervention. What should you do?
A. Configure a backup registrar.
B. Configure SQL Mirroring with a witness.
C. Deploy a Survivable Branch Server (SBS).
D. Deploy a Survivable Branch Appliance (SBA).
Answer: B
Microsoft認定資格 74-338 74-338 74-338認定試験
NO.2 You support a Microsoft Lync Server 2013 Enterprise pool named Lync2013.contoso.local.
The pool is configured
with two Session Initiation Protocol (SIP) domains named litware.com and fabrikam.com. The
environment also includes the following:
-three Front End Servers named Lync2013FEl, Lync 2013FE2, and Lync2013FE3 -one Back End Server
named Lync2013BE You plan to install a single Edge Server. You create an Edge pool named
Lync2013Edge.contoso.local. You want to configure the following Edge services:
-Access Edge to use sip.fabrikam.com
-Web Conferencing to use conf.fabrikam.com You also want to enable the federated access feature.
You need to assign internal and external certificates to the Lync 2013 Edge server. Which two
actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Request a private certificate from an internal certificate authority (CA) and include the name
Lync2013Edge.contoso.local. Assign the certificate to internal interface of the Edge Server.
B. Request a wildcard certificate for *.contoso.local from an internal certificate authority (CA).
Assign the certificate to internal and external interfaces of the Edge Server.
C. Request a certificate from a public certificate authority (CA) and include the names
sip.fabrikam.com, sip.litware.com, and conf.fabrikam.com. Assign this certificate to the external
interface of the Edge Server.
D. Request a certificate from a public certificate authority (CA) and include the names
Lyncdiscoverexternal.fabrikam.com and sipfederation.fabrikam.com. Assign the certificate to
internal and external interfaces of the Edge Server.
E. Request a certificate from a public certificate authority (CA) and include the names
sip.fabrikam.com and sip.litware.com. Assign this certificate to the internal interface of Edge Server.
Answer: A,C
Microsoft 74-338練習問題 74-338 74-338認定資格 74-338認定証 74-338
Explanation:
Lync Server 2013 uses certificates to provide communications
encryption and server identity authentication. In some cases, such as web publishing through the
reverse proxy, strong subject alternative name (SAN) entry matching to the fully qualified domain
name (FQDN) of the server presenting the service is not required. In these cases, you can use
certificates with wildcard SAN entries (commonly known as "wildcard certificates") to reduce the
cost of a certificate requested from a
public certification authority and to reduce the complexity of the planning process for certificates.
NO.3 You deploy Microsoft Lync Server 2013 Enterprise Edition and create a pool named
Lync2013pool.Contoso.local. You configure the Lync admin URL to be admin.contoso.local. The
Front End and Back End roles are installed on servers named FE2013 and BE2013.
You attempt to open the Lync Server Control Panel and you receive an error message. You need to
be able to open the Lync Server Control Panel. Which two actions should you perform? (Each
correct answer presents part of the solution. Choose two.)
A. Create the following DNS A record: lyncdiscoverinternal.contoso.local A 192.168.10.10
B. Create the following DNS A record: admin.contoso.local A 192.163.10.10
C. Create the following DNS A record: Meet.contoso.local A 192.168.10.10
D. Create the following DNS SRV record: _sipinternal._tcp.contoso.local SRV priority 0, weight 0,
port 5061 lync2013pool.contoso.local
E. Create the following DNS A record:lync2013pool.contoso.local A 192.168.10.10
Answer: B,E
Microsoft 74-338問題集 74-338 74-338 74-338 74-338
NO.4 You are a member of the CsAdministrator group that supports the Microsoft Lync 2013
datacenter for the Contoso company. The Contoso datacenter has 65,000 users. The datacenter has
two pools, named ConPool01 and ConPool02. Both pools run Microsoft Lync Server 2013. The
Central Management Store is hosted on ConPool01. The servers that run ConPool01 suffer a
catastrophic failure. You want users hosted on ConPool01 to be supported permanently on
ConPool02. You need to fail over ConPool01. What should you do?
A. Run the Set-CsConfigurationStoreLocation cmdlet.
B. Run the Install-CsDatabase PowerShell cmdlet, and then the Move- CsManagementServer cmdlet.
C. Run the Invoke-CsPoolFailover PowerShell cmdlet.
D. Run the Get-CsDatabaseMirrorState cmdlet, and then the Invoke-CSManagementServerFailover
PowerShell cmdlet.
Answer: D
Microsoft 74-338 74-338練習問題 74-338認証試験 74-338
NO.5 You support a customer whose Microsoft Lync Server 2013 environment includes:
-a single Standard Edition Server,
-a single consolidated Edge Server, and
-a single Forefront Threat Management Gateway 2010 server that is acting as an
HTTP(S) reverse proxy.
Client computers are configured as shown in the following table:
Some users report that they are unable to participate in audio/video conferences by using the Lync
Web App. You need to ensure that users are able to participate in audio/video conferences by using
the Lync Web App. Which two actions should you perform? (Each correct answer presents part of
the solution. Choose two.)
A. Install Microsoft Silverlight.
B. Upgrade the operating system to Windows 7 Professional.
C. Install the Lync Audio/Video ActiveX Plugin.
D. Extract the MSI from the executable and run the install.
Answer: B,C
Microsoft参考書 74-338 74-338
Explanation:
On supported Windows XP , Windows Vista, and Windows Server 2008 operating systems,
computer-based voice and video are not available. Application viewing, application sharing, desktop
viewing, and desktop sharing are available. A plug-in is required for certain Lync Web App features,
including computer-based voice, video, sharing, and viewing of ongoing screen sharing. You can
install the sharing plug-in either when you join the meeting or when you initiate one of these
features.
Reference: Lync Web App Supported Platforms
NO.6 You are a member of the CsAdministrator group that supports the Microsoft Lync datacenter
for the Contoso company. The datacenter consists of one pool that is running Lync 2013. Contoso
has a second Active Directory Domain Services (AD DS) site with a domain controller. The Lync
server pool fails. You need to recover the Central Management Store (CMS) and users. Which three
actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Run the Invoke-CsPoolFailover cmdlet.
B. Run the New-CsRegistrarConfiguration cmdlet.
C. Run the Install-CsDatabase and Move-CsManagementServer cmdlets.
D. Run the Move-CsDatabase and Set-CsManagementServer cmdlets.
E. Create a Backup pool.
Answer: A,C,E
Microsoft過去問 74-338参考書 74-338
Explanation:
A: Invoke-CsPoolFailover
Invokes the failover process for a Lync Server 2013 pool. Failover refers to the process that occurs
when a pool fails and the current users of that pool are then
signed on to a backup pool. The pool failover process provides a way for administrators to quickly
restore service to users if the Registrar pool they have
logged on to should suddenly become unavailable. If a pool fails, users will automatically be signed
off from Lync Server 2013; if they immediately try to log
back on, they will be redirected to their specified backup pool. C:
* The Move-CsManagementServer cmdlet enables administrators to move the Central Management
Server (and the accompanying Central Management store) from one pool to another. Because there
is always the potential for data loss, not to mention service interruption, any time you move the
Central Management Server, it is recommended that you do not make such a transfer unless:
1.You need to decommission the existing management pool, and must transfer the Central
Management Server before doing so.
2.You've encountered a disaster recovery scenario in which the existing Central Management Server
is no longer accessible.
Before you move the Central Management Server, you must do the following:
*1. Verify that you have created the new Central Management store.
This is done by running the Install-CsDatabase cmdlet and using the CentralManagementDatabase
parameter.
NO.7 You support a customer whose network environment includes Microsoft Lync Server 2013
Standard Edition. Your customer plans to enable sharing of Microsoft PowerPoint content in Lync
meetings. You enable the Office Web Apps Server discovery URL in the Lync Topology. You need to
verify that Lync Server 2013 enables PowerPoint content. What should you do?
A. Check the Event Log of the Front End pool server.
B. Check the Lync Server Control Panel.
C. Check the Event Log of the Office Web Apps server.
D. Verify the connection to the Office Web Apps Discovery URL in a web browser.
Answer: A
Microsoft 74-338認定資格 74-338練習問題
NO.8 You support a customer whose network environment includes Microsoft Lync 2013 deployed
in a datacenter that has two pools, named PoolA and PoolB. Both PoolA and PoolB have Microsoft
Lync Server 2013 installed. You use the Lync Management Shell for all administrative actions.
You run the Invoke-CsPoolFailover PowerShell cmdlet and you receive the following message:
Invoke-CsPoolFailOver: This Front-end pool "poolA.contoso.com" is specified in topology as the next
hop for the Edge server. Failing over this pool may cause External access/Federation/Split-
domain/XMPP features to stop working. Please use Topology Builder to change the Edge internal
next hop setting to point to a different Front-end pool, before you proceed. You need to fail over
PoolA only. What should you do?
A. Run the Get-CsDatabaseMirrorState cmdlet, and then run the
Invoke-CSManagementServerFailover PowerShell cmdlet.
B. Run the Set-CsAccessEdgeConfiguration cmdlet.
C. Run the Set-CsEdgeServer PowerShell cmdlet.
D. Run the Set- CsAVEdgeConfiguration cmdlet
Answer: C
Microsoft認定証 74-338認定試験 74-338 74-338
NO.9 You administer a Microsoft Lync Server 2010 Standard Edition server in your network
environment.
You deploy a Microsoft Lync Server 2013 Standard Edition server.
You want to migrate users from Lync Server 2010 to Lync Server 2013. You migrate a test account
from Lync Server 2010 to Lync Server 2013.
You start the Lync 2013 client on one of your test computers and start testing various modalities.
During testing, you decide to test the Meet Now functionality in Lync 2013 client. Meet Now starts a
conference and fails to connect.
You start Clslogging.exe. You generate a log that includes the following information:
You need to identify the cause of the issue. What should you do first?
A. Open another log file from the Lync client in Snooper.
B. Right-click the error message and select Go to nearest entry in trace viewer.
C. Start WireShark and perform the Meet Now test again.
D. Click Show Call Flow Window.
Answer: B
Microsoft 74-338認定証 74-338参考書 74-338 74-338過去問 74-338
NO.10 You support a Microsoft Lync Server 2013 environment.
The network includes:
-An Enterprise Edition Front End Pool with two Front End Servers,
-A mediation server that is collocated on the Front End Server, and
-A media gateway with 4 Tl trunks for public switched telephone network (PSTN) connectivity.
Users report intermittent outbound PSTN call failures. There are no issues with inbound PSTN calls.
You view the event log information as shown in the exhibit. (Click the
Exhibit button.)
You need to find out why outbound calls are failing.
Which two event IDs should you investigate? (Each correct answer presents a complete solution.
Choose two.)
A. 44009
B. 46009
C. 46026
D. 46027
Answer: B,D
Microsoft 74-338認定試験 74-338練習問題 74-338 74-338
Explanation:
Investigate the first error related to LS Outbound Routing (Event ID 46009) and the next event
related to LS Outbound Routing (information level event 46027).
NO.11 You support a Microsoft Lync Server 2013 Enterprise pool deployed in a high availability
configuration for Back End Servers named Backend 1 and Backend2. You execute the
Get-CSDatabaseMirrorState cmdlet and discover the following errors.
You need to resolve the connectivity issue and bring up the mirror databases to the synchronized
state between the Back End Servers. What should you do?
A. From the mirror Back End Server, create the inbound rule on the firewall.
B. From the Front End Server, create the inbound rule on the firewall.
C. Run the Test-CsDatabase cmdlet.
D. Run the Invoke-CsPoolFailOver cmdlet.
Answer: C
Microsoft 74-338問題集 74-338 74-338 74-338参考書
NO.12 You support a customer's Microsoft Lync Server 2013 environment.
Your customer has granted User1 Conferencing Policy A, and User2 Conferencing Policy B.
When User2 joins a video conference that is hosted by User1, User2 sees only a single video window,
while other users who are joined to the same conference see up to five concurrent video streams.
You need to configure the environment to allow User2 to view multiple concurrent video streams.
You need to achieve the goal with the fewest changes to the environment. Which cmdlet should you
run?
A. Get-CSConferencingPolicy -Identity 'Conferencing Policy B' | Set- CSConferencingPolicy -
EnableMultiViewJoin $True
B. Get-CSConferencingPolicy -Identity 'Conferencing Policy B' | Set- CSConferencingPolicy -
AllowMultiView STrue
C. Set-CSCIientPolicy - EnableFullScreenVideo $True
D. Set-CSCIientPolicy - EnableMediaRedirection STrue
Answer: A
Microsoft 74-338 74-338
NO.13 You plan to deploy a Microsoft Lync Server 2013 Enterprise server by using a
side-by-side upgrade from Office Communication Server (OCS) 2007 R2.
You perform the following actions:
-Complete the schema updates, forest update, and domain update.
-Define and connect the Lync Server 2013 topology to OCS 2007 R2 by using topology builder.
-Deploy Front End Pool, Director Pool, Persistent Chat Pool, and Edge Pool.
The Lync Server 2013 environment is using the OCS 2007 R2 Mediation Server
and associated PSTN gateway for PSTN inbound and outbound calls.
You want to test the Lync Server 2013 server for inbound, outbound, and dial-in
conference calls from a test computer that is located in a customer's office. Your
access to the customer network is restricted to Lync Severs, OCS servers, and some
test computers. During inbound, outbound, and dial-in conference calls, you encounter problems
with media.
The calls have significant jitter and packet loss. Calls are intermittently disconnecting.
You need to determine the cause of these problems. What should you do?
A. Run the ClsController.exe command and select the Incomingand OutgoingCalls scenario on the
Front End Server.
B. Run a protocol analyzer on the Public Switched Telephone Network (PSTN) gateway.
C. Run NetMonitor on the Edge Server.
D. Run NetMonitor on the Mediation Server.
Answer: D
Microsoft問題集 74-338 74-338認定試験
NO.14 You are a member of the CsAdministrator group that supports the datacenter for the Contoso
company. The Contoso datacenter runs Microsoft Lync Server 2013. The Central Management Store
is hosted on the principal back-end database. The back-end
database is configured to use synchronization mirroring without a witness. You want to perform
maintenance on the principal back-end database. You need to failover the mirrored database. What
should you do?
A. Run the Reset-CsPoolRegistrarState cmdlet.
B. Run the Get-CsDatabaseMirrorState cmdlet, and then run the
Invoke-CSManagementServerFailover PowerShell cmdlet.
C. Run the Invoke-CsPooIFailover PowerShell cmdlet.
D. Run the Test-CsDatabase cmdlet, and then run the Get-CsUserDatabaseState cmdlet.
Answer: B
Microsoft問題集 74-338 74-338 74-338練習問題 74-338問題集
NO.15 You support a customer whose network environment includes Microsoft Lync Server 2013
Standard Edition and Edge Servers. You create a group named HelpDesk You need to grant the
minimum level of permissions necessary for members of HelpDesk to be able to enable or disable
Lync users. What should you do?
A. Assign the CsServerAdministrator role to HelpDesk members.
B. Assign the CsAdministrator role to HelpDesk members.
C. Add HelpDesk members to the group RTCUniversalServersAdmins.
D. Assign the CsUserAdministrator role to HelpDesk members.
Answer: D
Microsoft認定試験 74-338 74-338 74-338
JPexamは最新のIIA-CGAP問題集と高品質のHH0-380問題と回答を提供します。JPexamのHP2-B102 VCEテストエンジンとCTAL-TM_Syll2012試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-652 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论