JPexamはJuniperのJN0-694認定試験についてすべて資料を提供するの唯一サイトでございます。受験者はJPexamが提供した資料を利用してJN0-694認証試験は問題にならないだけでなく、高い点数も合格することができます。
JPexamに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。JPexamは最新かつ最も正確な試験JN0-694問題集を用意しておきます。JPexamは皆さんの成功のために存在しているものですから、JPexamを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、JPexamはあなたの唯一の選択です。
JPexam を選択して１００％の合格率を確保することができて、もし試験に失敗したら、JPexamが全額で返金いたします。
ここで私は明確にしたいのはJPexamのJN0-694問題集の核心価値です。JPexamの問題集は100％の合格率を持っています。JPexamのJN0-694問題集は多くのIT専門家の数年の経験の結晶で、高い価値を持っています。そのJN0-694参考資料はIT認定試験の準備に使用することができるだけでなく、自分のスキルを向上させるためのツールとして使えることもできます。そのほか、もし試験に関連する知識をより多く知りたいなら、それもあなたの望みを満たすことができます。
今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。JN0-694認定試験はJuniperの中に重要な認証試験の一つですが、JPexamにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってJuniper JN0-694認証試験に参加する方に対して問題集を研究続けています。
試験番号：JN0-694問題集
試験科目：Enterprise Routing and Switching Support, Professional (JNCSP-ENT)
最近更新時間：2014-02-19
問題と解答：全36問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/JN0-694_exam.html
NO.1 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D
Juniper練習問題 JN0-694 JN0-694 JN0-694 JN0-694
NO.2 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D
Juniper認証試験 JN0-694 JN0-694認証試験 JN0-694認証試験
NO.3 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D
Juniper JN0-694認定資格 JN0-694 JN0-694問題集
NO.4 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D
Juniper練習問題 JN0-694 JN0-694 JN0-694
NO.5 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D
Juniper JN0-694 JN0-694問題集 JN0-694認定資格
NO.6 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C
Juniper認定証 JN0-694認定試験 JN0-694認定証 JN0-694
NO.7 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C
Juniper参考書 JN0-694認定資格 JN0-694過去問 JN0-694 JN0-694
NO.8 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A
Juniper参考書 JN0-694 JN0-694認定証
JPexamは最新の70-583問題集と高品質の74-409問題と回答を提供します。JPexamの1Z0-511 VCEテストエンジンとMB6-871試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-241 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论