人間はそれぞれ夢を持っています。適当な方法を採用する限り、夢を現実にすることができます。JPexamのCompTIAのPD0-001試験トレーニング資料を利用したら、CompTIAのPD0-001認定試験に合格することができるようになります。どうしてですかと質問したら、JPexamのCompTIAのPD0-001試験トレーニング資料はIT認証に対する最高のトレーニング資料ですから。その資料は最完全かつ最新で、合格率が非常に高いということで人々に知られています。それを持っていたら、あなたは時間とエネルギーを節約することができます。JPexamを利用したら、あなたは楽に試験に受かることができます。
CompTIAのPD0-001認定試験は全てのIT職員にとって大変重要な試験です。この試験に受かったら、あなたは絶対職場に廃れられることはありません。しかも、昇進と高給も実現できます。CompTIAのPD0-001試験に受かったら成功への鍵を握ったと言った人もいます。これは間違いないです。JPexamのCompTIAのPD0-001試験トレーニング資料はあなたが成功へのショートカットです。このトレーニング資料を持っていたら、成功への道を見つけます。
JPexamに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。JPexamは最新かつ最も正確な試験PD0-001問題集を用意しておきます。JPexamは皆さんの成功のために存在しているものですから、JPexamを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、JPexamはあなたの唯一の選択です。
JPexamのPD0-001問題集を利用してみたらどうですか。この問題集は最近更新されたもので、実際試験で出題される可能性がある問題をすべて含んでいて、あなたが一回で成功することを保証できますから。この問題集は信じられないほどの良い成果を見せます。試験に失敗すればJPexamは全額返金のことができますから、ご安心に問題集を利用してください。JPexamのPD0-001試験参考書できっとあなたが望ましい成功を取られます。
試験番号：PD0-001問題集
試験科目：CompTIA PDI+ Beta Exam
最近更新時間：2014-03-27
問題と解答：全861問
100％の返金保証。1年間の無料アップデート。
JPexamのシニア専門家チームはCompTIAのPD0-001試験に対してトレーニング教材を研究できました。JPexamが提供した教材を勉強ツルとしてCompTIAのPD0-001認定試験に合格するのはとても簡単です。JPexamも君の１００％合格率を保証いたします。
IT認定試験の中でどんな試験を受けても、JPexamのPD0-001試験参考資料はあなたに大きなヘルプを与えることができます。それは JPexamのPD0-001問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。真剣にJPexamのCompTIA PD0-001問題集を勉強する限り、受験したい試験に楽に合格することができるということです。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/PD0-001_exam.html
NO.1 Which of the following is the FIRST step a technician should take when troubleshooting a device
issue?
A.Gather information from the customer.
B.Isolate the problem on the device.
C.Read the service documentation for possible causes.
D.Check the parts life counters.
Answer: A
CompTIA認定証 PD0-001 PD0-001練習問題 PD0-001問題集
NO.2 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA PD0-001 PD0-001過去問 PD0-001認証試験 PD0-001
NO.3 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA練習問題 PD0-001 PD0-001認定資格 PD0-001
NO.4 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA参考書 PD0-001過去問 PD0-001 PD0-001認定試験
NO.5 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA問題集 PD0-001問題集 PD0-001 PD0-001問題集
NO.6 Scheduled preventative maintenance visits should be carried out:
A.after two unplanned service calls.
B.according to manufacturers specifications.
C.when the device is becoming unreliable.
D.every sixty days.
Answer: B
CompTIA過去問 PD0-001 PD0-001問題集 PD0-001
NO.7 Which of the following failed components would be responsible for the fuser unit not heating properly?
A.Halogen lamps
B.Ball bearing
C.Hot roller
D.Pressure roller
Answer: A
CompTIA PD0-001認定証 PD0-001 PD0-001認証試験 PD0-001練習問題
NO.8 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA過去問 PD0-001 PD0-001
NO.9 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA PD0-001 PD0-001 PD0-001認定試験 PD0-001
NO.10 Which of the following types of media would MOST likely cause above normal amounts of machine
jamming?
A.Envelopes
B.Colored media
C.Letterhead
D.Pre punched
Answer: A
CompTIA PD0-001認定資格 PD0-001 PD0-001過去問
NO.11 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA練習問題 PD0-001認定試験 PD0-001参考書 PD0-001
NO.12 When arriving at the customers location, two different users describe the problem, and from their
description it seems to be two separate problems. Which of the following is an appropriate step to take?
A.Ignore both of them and decide what the real problem is.
B.Set up a separate call for each problem.
C.Have them duplicate the problem at the device.
D.Ask a third person and see if the problem is the same thing.
Answer: C
CompTIA PD0-001 PD0-001認定試験 PD0-001
NO.13 Which of the following devices can route electrical signals only when activated by an external control
signal?
A.Solenoid
B.Relay
C.Clutch
D.Capacitor
Answer: B
CompTIA PD0-001参考書 PD0-001 PD0-001認定試験 PD0-001
NO.14 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA問題集 PD0-001 PD0-001 PD0-001参考書 PD0-001過去問
NO.15 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD0-001認定資格 PD0-001 PD0-001認証試験 PD0-001認定試験
NO.16 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA参考書 PD0-001 PD0-001練習問題 PD0-001過去問
NO.17 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA PD0-001練習問題 PD0-001問題集 PD0-001認定資格 PD0-001 PD0-001過去問
NO.18 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA認定資格 PD0-001問題集 PD0-001
NO.19 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA問題集 PD0-001 PD0-001練習問題 PD0-001
NO.20 How should a service representative provide closure at the end of a call for a client?
A.Explain the issues of the call, the steps taken to resolve them and query the client if they have any
additional needs.
B.Explain the solution to the issue and then provide the client with the technicians contact information in
case they have any questions.
C.Give the client a technical explanation on the issue and how it was fixed; throw any faulty equipment in
the clients garbage.
D.Proceed to the next service call, check back with the client in a week to see if they have any additional
needs.
Answer: A
CompTIA認定資格 PD0-001練習問題 PD0-001問題集 PD0-001認証試験
NO.21 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD0-001 PD0-001過去問 PD0-001過去問 PD0-001
NO.22 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA問題集 PD0-001認定資格 PD0-001認定資格 PD0-001
NO.23 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA認定証 PD0-001練習問題 PD0-001 PD0-001認定資格
NO.24 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD0-001参考書 PD0-001
NO.25 When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should
the technician handle this?
A.Answer the call and talk to your friend at the customer site.
B.Answer the call and tell the friend you will call them later.
C.Let it go to voicemail, call them back between service calls.
D.Let it ring and call the friend back when the customer leaves.
Answer: C
CompTIA PD0-001 PD0-001認定資格 PD0-001 PD0-001認定試験
NO.26 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA認定証 PD0-001 PD0-001 PD0-001 PD0-001練習問題
NO.27 Which of the following items can be used as a discharge lamp?
A.Halogen lamp
B.Light Emitting Diodes (LED)
C.Fuser lamp
D.Cleaning roller
Answer: B
CompTIA PD0-001 PD0-001認定試験 PD0-001 PD0-001認定資格
NO.28 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD0-001 PD0-001問題集 PD0-001
NO.29 Which of the following type of lamp is used for heating a fuser?
A.Xenon
B.Halogen
C.Incandescent
D.Light Emitting Diode
Answer: B
CompTIA PD0-001 PD0-001認定試験
NO.30 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA練習問題 PD0-001 PD0-001 PD0-001練習問題 PD0-001過去問
JPexamは最新のC4060-155問題集と高品質のBAS-002問題と回答を提供します。JPexamの74-335 VCEテストエンジンと000-276試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-623 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论