JPexamのA00-201 問題集はあなたがA00-201認定試験に準備するときに最も欠かせない資料です。この問題集の価値は試験に関連する他の参考書の総合の価値に相当します。このアサーションは過言ではありません。JPexamの問題集を利用してからこのすべてが真であることがわかります。
いまSASInstituteのA00-201認定試験に関連する優れた資料を探すのに苦悩しているのですか。もうこれ以上悩む必要がないですよ。ここにはあなたが最も欲しいものがありますから。受験生の皆さんの要望に答えるように、JPexamはA00-201認定試験を受験する人々のために特に効率のあがる勉強法を開発しました。受験生の皆さんはほとんど仕事しながら試験の準備をしているのですから、大変でしょう。試験に準備するときにはあまり多くの時間を無駄にすることを避けるように、JPexamは短時間の勉強をするだけで試験に合格することができるA00-201問題集が用意されています。この問題集には実際の試験に出る可能性のあるすべての問題が含まれています。従って、この問題集を真面目に学ぶ限り、A00-201認定試験に合格するのは難しいことではありません。
JPexam SASInstituteのA00-201試験資料は特別にデザインされたもので、IT領域のエリートが組み立てられた強い団体が受験生の皆様に向いて研究した資料です。認証試験に合格したら、あなたはIT領域で国際的な価値を表すことができます。JPexamには多くのダンプおよびトレーニング資料のサプライヤーがありますから、あなたが試験に受かることを保証します。JPexamは事実を通じて話しますから、奇跡が現れるときに我々が言ったすべての言葉を証明できます。
あなたが悲しいとき、勉強したほうがいいです。勉強があなたに無敵な位置に立たせます。JPexamのSASInstituteのA00-201試験トレーニング資料は同様にあなたに無敵な位置に立たせることができます。このトレーニング資料を手に入れたら、あなたは国際的に認可されたSASInstituteのA00-201認定試験に合格することができるようになります。そうしたら、金銭と地位を含むあなたの生活は向上させることができます。そのとき、あなたはまだ悲しいですか。いいえ、あなたはきっと非常に誇りに思うでしょう。JPexamがそんなに良いトレーニング資料を提供してあげることを感謝すべきです。JPexamはあなたが方途を失うときにヘルプを提供します。あなたの独自の品質を向上させるだけでなく、完璧な人生価値を実現することも助けます。
JPexamはIT認定試験のA00-201問題集を提供して皆さんを助けるウエブサイトです。JPexamは先輩の経験を生かして暦年の試験の材料を編集することを通して、最高のA00-201問題集を作成しました。問題集に含まれているものは実際試験の問題を全部カバーすることができますから、あなたが一回で成功することを保証できます。
試験番号：A00-201問題集
試験科目：SAS base programming exam
最近更新時間：2014-03-25
問題と解答：全140問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/A00-201_exam.html
NO.1 Which one of the following statements is true regarding the name of a SAS array?
A. It is saved with the data set.
B. It can be used in procedures.
C. It exists only for the duration of the DATA step.
D. It can be the same as the name of a variable in the data set.
Answer: C
SASInstitute認定資格 A00-201認定試験 A00-201認証試験
NO.2 A raw data record is listed below:
----|----10---|----20---|----30
Printing 750
The following SAS program is submitted:
data bonus;
infile 'file-specification';
input dept $ 1 - 11 number 13 - 15;
<insert code here>
run;
Which one of the following SAS statements completes the program and results in a value of 'Printing750'
for the DEPARTMENT variable?
A. department = trim(dept) || number;
B. department = dept || input(number,3.);
C. department = trim(dept) || put(number,3.);
D. department = input(dept,11.) || input(number,3.);
Answer: C
SASInstitute A00-201 A00-201問題集 A00-201
NO.3 The following SAS program is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists;
if jobcode = 'chem3'
then description = 'Senior Chemist';
else description = 'Unknown';
run;
A value for the variable JOBCODE is listed below:
JOBCODE
CHEM3
Which one of the following values does the variable DESCRIPTION contain?
A. chem3
B. Unknown
C. Senior Chemist
D. ' ' (missing character value)
Answer: B
SASInstitute認定試験 A00-201 A00-201認定資格
NO.4 The following SAS program is submitted:
data work.total;
set work.salary(keep = department wagerate);
by department;
if first.department then payroll = 0;
payroll + wagerate;
if last.department;
run;
The SAS data set WORK.SALARY, currently ordered by DEPARTMENT, contains 100 observations for
each of 5 departments.
Which one of the following represents how many observations the WORK.TOTAL data set contains?
A. 5
B. 20
C. 100
D. 500
Answer: A
SASInstitute参考書 A00-201 A00-201
NO.5 The contents of the raw data file FURNITURE are listed below:
----|----10---|----20---|----30
chair,,table
chair,couch,table
The following SAS program is submitted:
data stock;
infile 'furniture' dsd;
input item1 $ item2 $ item3 $;
run;
Which one of the following is the value of the variable named ITEM2 in the first observation of the output
data set?
A. table
B. ,table
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: D
SASInstitute A00-201練習問題 A00-201 A00-201 A00-201認証試験
NO.6 The following SAS DATA step is submitted:
libname temp 'SAS-data-library';
data temp.report;
set sasuser.houses;
newvar = price * 1.04;
run;
Which one of the following statements is true regarding the program above?
A. The program is reading from a temporary data set and writing to a temporary data set.
B. The program is reading from a temporary data set and writing to a permanent data set.
C. The program is reading from a permanent data set and writing to a temporary data set.
D. The program is reading from a permanent data set and writing to a permanent data set.
Answer: D
SASInstitute A00-201練習問題 A00-201 A00-201参考書
NO.7 The following SAS program is submitted:
libname rawdata1 'location of SAS data library';
filename rawdata2 'location of raw data file';
data work.testdata;
infile <insert item here>;
input sales1 sales2;
run;
Which one of the following is needed to complete the program correctly?
A. rawdata1
B. rawdata2
C. 'rawdata1'
D. 'rawdata2'
Answer: B
SASInstitute A00-201問題集 A00-201問題集
NO.8 A raw data record is shown below:
07.an2002
Which one of the following informats would read this value and store it as a SAS date value?
A. date9.
B. ddmonyy9.
C. ddMMMyy9.
D. ddmmmyyyy9.
Answer: A
SASInstitute練習問題 A00-201認定資格 A00-201 A00-201認定資格
NO.9 The following SAS program is submitted:
data work.retail;
cost = '20000';
total = .10 * cost;
run;
Which one of the following is the value of the variable TOTAL in the output data set?
A. 2000
B. '2000'
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: A
SASInstitute A00-201過去問 A00-201 A00-201認定証 A00-201
NO.10 The contents of the raw data file CALENDAR are listed below:
----|----10---|----20---|----30
01012000
The following SAS program is submitted:
data test;
infile 'calendar';
input @1 date mmddyy10.;
if date = '01012000'd then event = 'January 1st';
run;
Which one of the following is the value of the EVENT variable?
A. 01012000
B. January 1st
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
Answer: D
SASInstitute A00-201 A00-201認証試験
NO.11 The SAS data set named WORK.TEST is listed below:
Which one of the following SAS programs created this data set?
A. data work.test;
capacity = 150;
if 100 le capacity le 200 then
airplanetype = 'Large' and staff = 10;
else airplanetype = 'Small' and staff = 5;
run;
B. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
end;
else
do;
airplanetype = 'Small';
staff = 5;
end;
run;
C. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
else
do;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
end;
run;
D. data work.test;D.data work.test;
capacity = 150;
if 100 le capacity le 200 then;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
else;
airplanetype = 'Large'; airplanetype = 'Large';
staff = 10;
run;
Answer: B
SASInstitute A00-201認定試験 A00-201参考書 A00-201練習問題
NO.12 The following SAS program is submitted:
data work.staff;
JobCategory = 'FA';
JobLevel = '1';
JobCategory = JobCategory || JobLevel;
run;
Which one of the following is the value of the variable JOBCATEGORY in the output data set?
A. FA
B. FA1
C. FA 1
D. ' ' (missing character value)
Answer: A
SASInstitute認定資格 A00-201参考書 A00-201認定試験
NO.13 Which one of the following is true when SAS encounters a data error in a DATA step?
A. The DATA step stops executing at the point of the error, and no SAS data set is created.
B. A note is written to the SAS log explaining the error, and the DATA step continues to execute.
C. A note appears in the SAS log that the incorrect data record was saved to a separate SAS file for
further examination.
D. The DATA step stops executing at the point of the error, and the resulting DATA set contains
observations up to that point.
Answer: B
SASInstitute認証試験 A00-201 A00-201認定試験
NO.14 The following SAS program is submitted:
proc means data = sasuser.houses std mean max;
var sqfeet; run;
Which one of the following is needed to display the standard deviation with only two decimal places?
A. Add the option MAXDEC = 2 to the MEANS procedure statement.
B. Add the statement MAXDEC = 7.2; in the MEANS procedure step.
C. Add the statement FORMAT STD 7.2; in the MEANS procedure step.
D. Add the option FORMAT = 7.2 option to the MEANS procedure statement.
Answer: A
SASInstitute過去問 A00-201 A00-201問題集
NO.15 The following SAS SORT procedure step generates an output data set:
proc sort data = sasuser.houses out = report;
by style;
run;
In which library is the output data set stored?
A. WORK
B. REPORT
C. HOUSES
D. SASUSER
Answer: A
SASInstitute認定資格 A00-201 A00-201 A00-201
NO.16 The following SAS program is submitted:
data work.month;
date = put('13mar2000'd,ddmmyy10.);
run;
Which one of the following represents the type and length of the variable DATE in the output data set?
A. numeric, 8 bytes
B. numeric, 10 bytes
C. character, 8 bytes
D. character, 10 bytes
Answer: D
SASInstitute A00-201問題集 A00-201参考書 A00-201参考書 A00-201
NO.17 The contents of two SAS data sets named EMPLOYEE and SALARY are listed below:
The following SAS program is submitted:
data work.empsalary;
merge work.employee (in = inemp)
work.salary (in = insal);
by name;
if inemp and insal;
run;
How many observations will the data set WORK.EMPSALARY contain?
A. 2
B. 4
C. 5
D. 6
Answer: B
SASInstitute A00-201参考書 A00-201 A00-201
NO.18 Click the Exhibit button to view a listing of the SASUSER.HOUSES data set.
The following SAS program is submitted:
proc report data = sasuser.houses nowd headline;
column style price;
where price lt 100000;
<insert DEFINE statement here>
define price / mean width = 9;
title;
run;
The following ouput is created by the REPORT procedure:
Which one of the following DEFINE statements completes the above program and produces the above
output?
A. define style / order width = 9;
B. define style / group width = 9;
C. define style / across width = 9;
D. define style / display width = 9;
Answer: B
SASInstitute問題集 A00-201 A00-201過去問 A00-201 A00-201認定証
NO.19 The following SAS program is submitted:
data work.flights;
destination = 'CPH';
select(destination);
when('LHR') city = 'London';
when('CPH') city = 'Copenhagen';
otherwise;
end;
run;
Which one of the following is the value of the CITY variable?
A. London
B. Copenh
C. Copenhagen
D. ' ' (missing character value)
Answer: B
SASInstitute練習問題 A00-201 A00-201
NO.20 The following SAS program is submitted and reads 100 records from a raw data file:
data work.total;
infile 'file-specification' end = eof;
input name $ salary;
totsal + salary;
<insert IF statement here>
run;
Which one of the following IF statements writes the last observation to the output data set?
A. if end = 0;
B. if eof = 0;
C. if end = 1;
D. if eof = 1;
Answer: D
SASInstitute A00-201参考書 A00-201認証試験 A00-201 A00-201
JPexamは最新のHP2-Z25問題集と高品質の70-480問題と回答を提供します。JPexamのC4040-123 VCEテストエンジンと98-375試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-273 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论